In Game Use

Once you enter the vehicle with StarChase Installed the GUI should appear on your screen, note the GUI Box is draggable so you can reposition it to you liking.

The GUI can be further toggled using the toggle key set in the Settings.

At the bottom of the GUI you can see each module along with its status, with the selected module being solid. Along the top you can see the Armed and Automatic mode indicators. And on the right side you can see the Arm, Fire and Automatic Buttons.

After the system is armed the Laser Distance Sensor will enable and the Distance Ranging Display will light up indicating the distance from the target vehicle if it is in range.

At this point you can fire the StarChase Module manually using the button or the quick fire button.

Once fired you can use the Direction tracker display on your StarChase GUI to locate the module, however if the module is destroyed you do lose the ability to track it.

Using Automatic Mode

The Automatic mode can be used during traffic stops when the officer may not be in the vehicle, when active and armed the StarChase system can automatically fire a module if the target vehicle moves.

Using the StarChase App

Opening the GUI is done via a preconfigued key within the settings of the GUI, once opened you can see the main radar display on the left and the list of Modules on the left along with detailed info on the top right corner. To gain detailed info on a module click the yellow arrow and it will populate and update.